Also in the Article



During core handling and tracer penetration periods, box cores were immersed in seawater in the laboratory at in situ collection temperatures (15° to 22°C), and the water overlying cores was continuously aerated to maintain O2 saturation. At ~20 to 24 hours following tracer introduction, overlying water was removed and, for vertically oriented sections, the core sides were gently replaced with thin (2 mm) plastic sheets, with holes drilled in 2D grids to receive Rhizon pore water extractors (2 mm diameter, 5 cm length, 0.2 μm pore size; Rhizosphere Research Products). Horizontal arrays were similarly obtained using drilled plastic sheet for orientation at successive depth levels.

注意:以上内容是从某篇研究文章中自动提取的,可能无法正确显示。



Also in the Article

Q&A
请登录并在线提交您的问题
您的问题将发布在Bio-101网站上。我们会将您的问题发送给本研究方案的作者和具有相关研究经验的Bio-protocol成员。我们将通过您的Bio-protocol帐户绑定邮箱进行消息通知。